BLXDX - THERMCON 2000, 73-9405
- MSDS: BLXDX
- Manufacturer: NATIONAL STARCH AND CHEMICAL CO
- Product Name: THERMCON 2000, 73-9405
- National Stock Number: 6850-00N023568
Product Identification
Product ID:THERMCON 2000, 73-9405
MSDS Date:06/20/1989
FSC:6850
NIIN:00N023568
MSDS Number: BLXDX
Responsible Party
BRIDGEWATER, NJ 08807
US
Emergency Phone: 908-685-5000
Info Phone: 908-685-5000
Preparer: ERIKA J PASARELA
Cage: 85091
Contractor
Telephone: 908685-5306
Cage: 85091
Ingredients
NON HAZARDOUS INGREDIENT
Hazards
LD50 LC50 Mixture:LD50: (ORAL, RAT) >5 G/KG.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRITATING, BUT DOES NOT INJURE
EYE TISSUE. SKIN: NO HAZARD IN NORMAL INDUSTRIAL USE. INHAL: IF
CURED MATERIAL IS SANDED RESULTING POWDER WOULD BE CONSIDERED
HAZARDOUS. INGEST: MINIMAL TOXICITY. CHRONIC EFFECTS HAVE NOT BEEN
DETERMINED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES AND UNTIL IRRITATION SUBSIDES. IF IRRITATION PERSISTS, GET
MD ATTENTION. SKIN: FLUSH WITH LARGE AMOUNTS OF WATER; USE SOAP IF
AVAILABLE. INHAL: FIRST AID IS NOT NORMALLY REQUIRED. INGEST:
TREAT SYMPTOMATICALLY AND SUPPORTIVELY. GET MEDICAL ATTENTION.
Fire Fighting
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:SLIGHT TO MODERATE FIRE AND EXPLOSION
HAZARD WHEN EXPOSED TO HEAT OR FLAME.
Accidental Release
Spill Release Procedures:NORMAL PRECAUTIONS FOR "NUISANCE DUST" SHOULD
BE OBSERVED. AVOID PROLONGED INHALATION OF DUST. SWEEP UP OR VACCUM
UP AND PLACE IN SUITABLE CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR IF REQUIRED; SCBA
IN EMERGENCY AND NON-ROUTINE SITUATIONS.
Ventilation:GENERAL.
Protective Gloves:PLASTIC GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING IS NORMALLY NOT
NECESSARY FOR FORSEEABLE CONDITIONS OF USE.
Work Hygienic Practices:NOT NOTED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:189F,87C
Spec Gravity:0.750
Solubility in Water:INSOLUBLE
Appearance and Odor:OFF-WHITE SOLID.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID OXIDIZERS AND REDUCING AGENTS.
Stability Condition to Avoid:AVOID RAPID OR PROLONGED HEATING ABOVE THE
MELTING POINT.
Hazardous Decomposition Products:WHEN HEATED TO VERY HIGH TEMPERATURES,
MATERIAL MAY EMIT TOXIC OR IRRITATING FUMES.
Disposal
Waste Disposal Methods:WASTE DISPOSAL SHOULD BE I/A/W EXISTING FEDERAL,
STATE AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.